MOCK TEST ON GEOGRAPHY OF ECONOMIC ACTIVITIES PYQS JULY & DEC 2018 NTA UGC NET

MOCK TEST ON GEOGRAPHY OF ECONOMIC ACTIVITIES PYQS JULY & DEC 2018 NTA UGC NET

Mock Test on GEOGRAPHY OF ECONOMIC ACTIVITIES PYQS 2018 NTA UGC NET, Mock Test on ECONOMIC GEOGRAPHY NTA UGC NET DEC 2018, Mock Test AGRICULTURAL GEOGRAPHY PYQS UGC NET 2018,  INDUSTRIAL GEOGRAPHY PYQS JULY 2018, NTA UGC NET PYQS GEOGRAPHY, Mock Test GEOGRAPHY OF ECONOMIC ACTIVITIES PYQS UGC NET, GEOGRAPHY PYQS UGC NET, 

GEOGRAPHY OF ECONOMIC ACTIVITIES MOCK TEST 2018

To Attempt this Mock test, Click on the Below Start Button

 

0%
31
Created on By netset corner

2018 GEOGRAPHY OF ECONOMIC ACTIVITIES PYQS UGC NET

  • This Test Contains 18 Questions
  • Total Questions is 18
  • All Questions are Compulsory
  • No Negative Marking
  • Specific Time given for this quiz
  • Quiz / Test will start after clicking on Start Button
  • After Completing Quiz, can see result in Percentages (%)
  • Note If you found anything  wrong then please WhatsApp us -8436520537
  • Attempt Carefully, so lets start, best wishes 

 

 

 

1 / 15

Q.1. Match the List-I with List - II and select the correct answer from the code given below: (UGC NET JULY 2018)

List-I (Countires)          

(a) Liberia

(b) Guinea

(c) Togo

(d) Niger

List-II (Mineral Reserve)

(i) Argentina

(ii) Sri Lanka

(iii) New Zealand

(iv) Mangolia

Code:

     (a)  (b)  (c)  (d)

(1) iv    iii     ii    i

(2)  i     iv     iii   ii

(3) ii      i      iv   iii

(4) iii    ii       i    iv

2 / 15

Q.2. Match the List-I with List - II and select the correct answer from the code given below: (UGC NET JULY 2018)

List-I (Sectors of the Economy)      

(a) Primary

(b) Secondary

(c) Tertiary

(d) Quaternary

List-II (Activities)

(i) Research endavours

(ii) Train services

(iii) Pearl culture

(iv) Spinning cotton year

Code:

     (a)  (b)  (c)  (d)

(1) i      ii     iii    iv

(2) iii     iv     ii    i

(3) ii      i      iv   iii

(4) iv    iii     i      ii

3 / 15

Q.3. Which one of the following countries holds the first rank in commercial dairy farming? (UGC NET JULY 2018)

(1) USA

(2) India

(3) China

(4) Pakistan

4 / 15

Q.4. Match the List-I with List - II and select the correct answer from the code given below: (UGC NET JULY 2018)

List-I (Economy)                                           

(a) Subsistence Economy

(b) Commercial Economy

(c) Intensive Subsistence Economy

(d) Extensive Subsistence Economy

List-II (Features)

(i) Market competition as primary force shaping the production patterns

(ii) Self-sufficiency, low production an low population density

(iii) Self-sufficiency, high production and high population density

(iv) Little exchange of goods and only limited need for markets

Code:

     (a)  (b)  (c)  (d)

(1) ii    iii     i      iv

(2) iv    i      iii     ii

(3) iii    ii     iv     i

(4)   i   iv      iii    ii

5 / 15

Q.5. Match the List-I with List - II and select the correct answer from the code given below: (UGC NET JULY 2018)

List-I (Whitlessey’ Agricultural Religions)       

(a) Commercial Dairy Farming

(b) Commercial Grain Farming

(c) Nomadic Herding

(d) Commercial Plantations

List-II (Name of Countries)

(i)  Argentina

(ii) Sri Lanka

(iii) New Zealand

(iv) Mangolia

Code:

     (a)  (b)  (c)  (d)

(1) iii     i     iv     ii

(2)  i    ii      iii     iv

(3) iv   iii      ii      i

(4)  ii   iv       i     iii

6 / 15

Q.6. The formula ENYEDI AGRICULTURAL PRODUCTIVITY where PI= Agricultural Productivity Index; Y= Total production of selected crops in unit area; Yn= Total production of same selected crops at national level; T= Total cropped area of the unit; Tn = Total cropped area at national scale. (UGC NET JULY 2018)

(1) Bhatia

(2) Enyedi

(3) Weaver

(4) Shafi

7 / 15

Q.7. Among the following scholars, who introduced the concept of ‘Least-Transport-Cost Location’ using the frame of ‘Location triangle’? (UGC NET JULY 2018)

(1) W. Isard

(2) M.K Bandman

(3) D.M. Smith

(4) A. Weber

8 / 15

Q.8. Which one of the following conditions Alfred Weber introduced in his concept of ‘Locational Triangle’? (UGC NET JULY 2018)

(1) Both ‘R1’ and ‘R2’ are found universally

(2) ‘R1’ is fixed but ‘R2’ is found everywhere and both are pure

(3) Both ‘R1’ and R2 are fixed and pure

(4) Both ‘R1’ and ‘R2’ are fixed and gross

    (Where: ‘R1’ and ‘R2’ are two raw materials)

9 / 15

Q.9. Which of the following can be categorized as a primary activity? (UGC NET DEC 2018)

(1) Coal mining

(2) Teaching

(3) Handicraft

(4) Car manufacturing

10 / 15

Q.10. Which one of the following categories of urban land use as per given graph has the highest gradient of its economic rent at 2 km distance? (UGC NET DEC 2018)

(1) Green land

(2) Residential

(3) Industrial

(4) Commercial

11 / 15

Q.11. Which one of the following authors initiated concept of 'Isodapanes in space-economy'? (UGC NET DEC 2018)

(1) A. Losch

(2) A. Weber

(3) E. Hoover

(4) T. Planer

12 / 15

Q.12. Which one of the following indices is used to indicate if the optimal location was closer to either raw material source or the market? (UGC NET DEC 2018)

(1) Material Index

(2) Labour Cost Index

(3) Relative Spread Index

(4) Weighted Index

13 / 15

Q.13. Which one of the following is correct for the cost-input graph of industrial production system, where point of profit maximising output is (UGC NET DEC 2018)

(1) Marginal cost is not equal to marginal revenue

(2) Average cost equals average revenue

(3) Marginal cost equals marginal revenue

(4) Total cost equals total revenue

14 / 15

Q.14. Which one of the following statements correctly explains the difference between Gravity model and Potential model? (UGC NET DEC 2018)

(1) Gravity model deals with only two places at a time, while Potential model accounts for interactions between many places

(2) Gravity model makes no provision for size of places, while Potential model considers size of places.

(3) Both Gravity model and Potential model are the same.

(4) Gravity model does not take distances into account, while Potential model takes distances into account.

15 / 15

Q.15. Which one of the following factors of a boundary determination between the areas of two competing firms is correct, if the gradients of delivered price and freight rate of firms production is same? (UGC NET DEC 2018)

(1) Closer distance from the location of firms

(2) Output of firm

(3) Price at plant/firm

(4) Raw material available

Your score is

The average score is 68%

0%

 

Click Here – to Download ECONOMIC GEOGRAPHY PYQS PDF 2018

 

 UNIT WISE GEOGRAPHY PYQS MOCK TEST 

Click Here to Attempt Unit Wise PYQS Mock Test

 MODEL / PRACTICE TEST GEOGRAPHY PAPER 2

Click Here to Attempt Model Test 

 UNIT WISE GEOGRAPHY MCQS MOCK TEST

Click Here to Attempt Unit Wise Mock Test

SHIFT 1 & SHIFT 2 PAPERS DEC 2020 JUNE 2021

(1) DEC 2020 JUNE 2021 SHIFT-1 PAPER 2 GEOGRAPHY NTA UGC NET

(2) DEC 2020 JUNE 2021 SHIFT-2 PAPER 2 GEOGRAPHY NTA UGC NET

Syllabus:

Unit–VI:   Geography of Economic Activities and Regional Development            

Economic Geography

Factors affecting spatial organisation of economic activities (primary, secondary, tertiary and quarternary), Natural Resources (classification, distribution and associated problems), Natural Resources Management. World Energy Crises in Developed and Developing Countries.

Agricultural Geography 

Land capability classification and Land Use Planning, Cropping Pattern: Methods of delineating crop combination regions (Weaver, Doi and Rafiullah), Crop diversification, Von Thunen’s Model of Land Use Planning. Measurement and Determinants of Agricultural Productivity, Regional variations in Agricultural Productivity, Agricultural Systems of the World.

Industrial Geography 

Classification of Industries, Factors of Industrial Location; Theories of Industrial Location (A. Weber, E. M. Hoover, August Losch, A. Pred and D. M. Smith). World Industrial Regions, Impact of Globalisation on manufacturing sector in Less Developed Countries, Tourism Industry, World distribution and growth of Information And Communication Technology (ICT) and Knowledge Production (Education and R & D) Industries. 

 

Leave a Comment

error: Content is protected !!